Universal Scarecrow including bag

The new and versatile Scarecrow

The “Universal” scarecrow is composed of a base, 12 polyester rods with small balls at the ends, as well as a mounting flange. The flange is just 15 mm and can be permanently installed in any position with just 2 screws.

The unit is mounted by simply clipping and twisting through the bayonet-lock. Push down the safety bolt afterwards and the scarecrow is ready-to-use.

The polyester rods are individually changeable and can be removed according to the demand, i.e. single rods can be removed for mounting on individual bathing platforms.  

Accessory 1: Rail bracket for “Universal” Scarecrow 

The bracket can be screwed on the railing or handrails permanently or just temporarily. The flange with bayonet-lock is already fitted to the bracket.  

Accessory 2: Canopy bracket for “Universal” scarecrow

Many boats will be covered with a canopy when they are not in use. In that case the “Universal” scarecrow can still be used without any problems. The canopy bracket will be delivered with the flange, 2 plastic plates and the fitting screws. In a suitable position one cut 2 small holes in the canopy for the screws. The two plates are then attached to each other, one on each side.  The plates with the flange remain permanently attached to the canopy.  

Accessory 3: Telescopic Support

Mount the support and secure the scarecrow.  Then adjust the high you wish with the telescop

• For larger boats you simply use additional scarecrows
• In the case that you wish to use the Scarecrow whilst your boat is covered with a canopy or tarpaulin, you will need to make a 30mm hole in the material to insert the pole. The Art. No. 2082 and 2083 is designed to stop water coming through that hole

Technical Data

Art. No. : 2100

Universal Scarecrow including bag

• Material: Nylon, wires polyester
• Size: L = 1.8 m Diameter open ø ca. 2.7 m
• Weight: 0.7 kg    

Art. No. : 2105

Canopy bracket

• Material: Nylon, Plates PVC
• Size: 220 x 220 mm
• Weight: 0.3 kg    

Art. No. : 2110

Rail bracket

• Material: Nylon, Stainless steel V4A
• Size: Disc ø = 80 mm
• Weight: 0.5 kg  

Art. No. : 2111

Telescopic Support

• Telescopic Support for Universal Scarecrow
  
• Dimensions: ø = 25/30 mm, L = 0.7 -1.30 m
• Material: Stainless steel,  V4A  
• Weight: 1.5 kg